Mazda Questions Any type
Stereo
I am trying to remove the factory radio and when I take off the side panels there are 5 holes which 2 are for the removal key
Replacing Headlight Housing On 2003Mazda Mpv
I am trying to replace the headlight housings since they are cracked. I took out the two visible bolts, but the housing is not coming out. Any suggestions?
Between 98 And 02 Which Seems To Be The Most Reliable MPV?
Looking to buy a used Mazda MPV and would like some feedback on which model year between 1998(FWD) and 2002 seem to be the most reliable.Have read many reviews and some problems: ie rear heater hoses ...
Where To Put Transmission Fluid In 1993 RX7
Husband trying to find where to put transmission fluid
Engine Light Blinking
Engine light was on for about a month and went out and came back on again. Now the car is sputtering when I accelerate or sitting idle. What could the issue be?
Can I Install A Renesis For Automatic Transmission In A Car With Manual Tra...
Hello Was wondering what is the difference if any between a Renesis engine for an Automatic transmission and one for a manual transmission. I have an RX-8 with manual tranny, and am getting a deal on...
Where The Hell Can I Find A 13b Turbo Swap For 89' Rx7 In (so Cal) For Chea...
i need everything, motor/trans/driveshaft/rearend... need some insight, please, car has sat for too long!!!
Does This Car Come Equiped With Tethers
I was wondering if this car comes equipped with tethers for rear facing infant seat installation. I am having an extremely hard time installing the base. I have to place it on the side instead of th...
How Durrable Is The Mazda3's Engine?
I've been reading about how many import engines such as the SR20DETT, 2JZ-GTE, 4G63, and Honda B-series engines are so robust in construction, that they can safely be tuned to make incredible power. I...
Engine Swap Into Miata
Here is a tuffy: I am unsure about the bolt in of my 13B-REW from a series 8 FD RX7 in my 91 Miata. My Miata was a NA6 model and I was wondering if anyone knows if I need custom fabricated engine moun...
Rabbit Ate Wires Under The Hood
My son parked his 1995 Protege on our property. A rabbit has made it a home. I need to find a picture or something so I know what wires to oreder to replace.
Mazda 6 I Painted
Painted complete car
Engine Cuts Out?
when i first start off it isnt that bad but once i drive over forty or try to maintain speed with and without using cruise control the engine starts to cut out and it sounds almost like the pistons ar...
Fuel Issues
Can't seem to get fuel into the injectors. Car fires for 1/2 a sec, then nothing. Checked EFI relay, it's good. Fuel pump relay was bad, replaced. All fuses are fine. Fuel pump is fine. Have not chec...
6 To 5 Lug Conversion
i have an 86 mazda b2000 truck which i have converted to a drag truck. in the back i have a narrowed dodge 8.75 rearend that is 5 bolt with weld drag wheels. i cant get matching wheels in a 6 bolt f...
TCS Light Comes On And Looses Accelaration
I have 2002 Mazda Millenia S the TCS comes on by it self when driving it on the street highway speed is normal. When TCS comes on vehicle looses accellaration. what could be the cause of it.
What Would Cause A Clunking Noise, From My Suspension, Upon Acceleration In...
Sometimes it makes the noise when I turn. I thought it might be the brakes but they checked out fine. I was wondering if an engine mount being broken could also be the cause.
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.