Ford Bantam Questions Any type
- Recently Active
Where to put right fuse size on fuse box for ford bantum rocam 2007
Good day, can someone tell me if the fuel in the fuel rail should be pressurized after the vehicle is switched off. There is no pressure in the fuel rail when i remove my feed and return line, is the...
need cylinder head gasket torque specs. Ford bantam rocam, 1.3, 2006 model. Stood a while, and oil looks like mud, not starting. Want to change cyl head gasket.
I have 1.3 ford banram Rocam, I drive for as long as I can but immediately I park it, it does not crank or start at all and the petrol and water gauges all Rose perfectly but the engine is quite, ...
Hey there... Does anyone know what the arrow with a "P" is for in the glove box of a Ford bantum (2006)there's 2 cup holders and a pen holder but no idea what the slot that the P is pointing to.
Hi all I have a 2004 Ford Bantam 1.3 rocam that is not starting the lights on the dash come on but the fuel pump does not turn on and the starter motor doesn't turn over the light next to the clock ...
They did a major service on my car but now it doesn't want to idle, it swings, start and then immediately shut off like it ran out of fuel, I have checked the fuel system it fine, checked all the ...
how do you identify a 1300 gearbox from a 1600 gearbox.
Where is the Ford buntam rocam oxygen sensor located
Hi everyone i have a 1993 model ford bantam the engin cranks but wont start can some please help me i really want to fix this problem dont know where the fuel cut off switch is located or how it l...
What are the main bearing and bid end torque settings?
I am battling with a Ford bantam 2011 1300xl. Above the back axel there's a pump or cylinder thing. It is leaking I have a photo is done one could help. To me it looks like a pin is missing
am driving ford bantum the driver door does not open from the inside please help
Hi. My 2007 Ford bantam is giving me a problem, whenever I accelerate it flashes hazard lights. What could be the problem? Thanks
My fan does not come on after removing the engine coolant temp sensor plug. My bantam also overheats. Some times it does some times it doesnt n when it does the radiator fan isnt running. I have ch...
I have replaced a thermostat on my Rocam 2006 model but it's still over heating, a fan is not automatically start.
Trying to Assist a friend
Ive got a 1.3 rocam and i want to swop it with a 1.6 rocam what do i need to do. Will the gearbox need replacing ect...
Car fan, a/c, electric windows, indicators, speedometer, rev counter, fuel gauge and temporary gauge not working. They were intermittent yesterday but today they just don't work at all so I suspect...
I BOUGHT A 1997 BANTAM LDV BUT I HAVE TO REPLACE THE FRONT AXLES,HUBS AND BEARINGS EVERY 3000KM WHY WHAT IS THE REASON
Search Ford Bantam Questions
Ford Bantam Experts
Find great deals from top-rated dealersSearch