Ford Bantam Questions Any type

Where Is This Vain Air METER Located In The Ford Bantam 1998 1600i ?

Where is the Vain Air Meter located of the Ford Bantam 1998 1600i

1998 FORD BANTAM INERTIA LOCATION

where is this ford bantam reset inertia located or does it have any of such a thing? FORD BANTAM 1998 1600i

Where Is Ford Bantam 1998 1600i Enertia Located

want to find out about location my car's enertia located

What Causes A Noise At The Front Suspension

Hi guys, my car has a knocking sound at the front suspension, I had my lower control arm changed, stabilizer links, bearings changed, What exactly might be the problem please help?

The Steering Pump On My Ford Bantam 2006 Model Rocam Engine.

The steering pump on my 2006 Ford Bantam has reached the end of its life. The new replacement pump differ on size on the pressure port of the new pump. ie 14mm for the new and 17mm for the old. Is t...

The Engine Cuts Whiles Driving

When driving the engine cuts on idling, what is the Cause of that?

No Power When Driving Forward

Bakkie have no power driving uphill,mechanic says it is 2 faulty valves,changed new timing kit like i was told,but still no power when it pull uphill

Ford Bantam 1.3 Rocam No Signal On Crank & Cam Sensor

My car cranks but no start and no signal or Power on crank &cam sensor but injectors got power and coil

Ford Bantam 1.6 XLT Jerking

I have a 2008 Bantam Rocam (1.6 XLT). while driving at a constant speed it would jerk every now and then. Had a service done but the jerking still there and gotten worse, Bakkie smells like it runs ri...

Ford Bantam Not Cranking

Hello, I have a ford bantam 1.3 rocam and every time it rains it wont crank at all.

Feul System Ford Bantum Rocam Enjin 1.3

Hi i have a ford bantum 1.3 rocam enjin, i have replaced the feul pump and the fuel intake line from the feul tank to the injectors but now when i drive the vehicle jurks and a strong smell of fuel...

Help With My Ford Bantam

Hi my ford bantam cut out whilst driving on a highway, and failing to start now.. First I thought it may be the alternator, however the battery is fully charged still.. any suggestions on what else...

Ford Bantam Rocam Motor Cuts Out When Steering Is In Full Lock

The engine idles at 950 rpm but as soon as the air cooler is on and the steering is in full lock the engine cuts out? have checked the steering pump and alternator. where else can I look? its a 1300

I Have A 13XL Bantum Bakkie Year 2008

My car is leaking water somewhere. Sometimes I see water on the left hand side a little way in behind the wheel and other days not. I'm not sure if it is the head as my oil does not look milky but ...

Car Wont Run Over 100km/h

Hi, I have a 2009 Ford Bantam 1.6 Rocam, I exchanged the motor with a overhauled one but now it has a noise in the engine that sounds like something is loose more in the head side and the motor wont...

Ford Bantam Rocam Not Starting

my bakie i have remove the engine to seal the leaks on oils but now when i replace it there was no spark fuel is not coming oil light and bettary light also not showing

Won't Start Or Turn What Do I Do?

I have a ford bantam 1.3i xl rocam...the ignition goes on but when i turn the key the dash lights goes off and it does nothing...what can be the cause coz it just happened all of a sudden

My 1.3 Ford Bantam Rocam Won't Start

I've replaced the head gasket on my 1.3 Ford bantam rocam. Now it won't start it sounds axactly like a blown head gasket and I honestly can't find the fault

What Makes The Light Next To Clock Flash Faster

Hi. 2004 bantam Rocam 1.6 what causes the light next to the clock to flash fast?.And most of the lights flashing and clicking when I switch the engine off?

Connections At Air Conditioner Motor