Ford Bantam Questions Any type
Do The Valves On A 1.3 Rocam Engine Bend When The Chain Breaks
bantam 1.3 rocam engine
Does Not Start
hi, I have a ford bantam 2010 model, we found that the computer box was blown, I have replaced it but the car does not start, some of the lights on the dashboard goes on but not all,
Computer Box - Ford Bantam 1.3
Hi. The dealer advised me that the computer box needs to be replaced.When I check my warranty documents it doesn't say anything about a computer box being covered . only talks about a transfer box. Is...
MY CAR IS NOT STARTING
MY CAR HAS STOPPED STARTING AFTER I REPLACED MY BATTERY AND PLACED A BIGGER BATTERY BUT ON THE WRONG TERMINALS IT FIRST STARTED AND IT WENT OFF WHILE IT WAS STILL ON THE WRONG TERMINALS SO WHAT COU...
Cost Of The Rubber Hydraulic Pipe Ford Bantam 1300i
hose is about 20cm in lenght
Can I Change A Ford Bantam 1.3i 2006model From Taking Out The Computer Box ...
can i change a ford bantam 1.3i 2006model from taking out the computer box and installing a caburator will it start
Engine Wont Start Over
my car is 2004 model ford bantam 1.3 with rocam engine, the problem does not start over the engine, I have ckecked petrol pump with all pipes supply, it seems ok, the battery is new. One of my frien...
I Have A 2003 Bantam Which Do Not Want To Start
I ve got a 2003 bantam which do not want to start. I have change all filters and new plugs. There is spark on the plugs. very few petrol coming through fuel line. I can hear the fuel pump going on. Ho...
Reset Button For Ford Bantam 2005 1.8 Diesel Pickup
no fuel going to dieselpump car wont start
My Fan Run Constantly And My Heat Gauge Stays Cold What Should B Done For B...
I drive a ford bantam Rocam 1.3 the fan runs constantly the heat gauge even stays cold, now I feel like it looses power
Aircon
My aircon kicks in by itself while I'm driving and the pulley is making a hell of a noise, so bad that a guy handed me a service ticket for maintenance this morning on my way to work. And the aircon i...
I Stay Far From Ford Dealership And I Need The Type Of Brake Fluid Type For...
2011 1.3 XL Ford Bantam, I noticed that 2007 is the last year as manufacturing year, however this one was manufactured in 2011.
Hi Guys I Own A Ford 1.3 Rocam That Does Not Start Up But I Took Out Inject...
Computer box is a 1.6 but set to a 1.3
My 1.3i Bantam 2008 Breaks Down At High Revs
the car seams fine and when you drive it over about 3000 rpm it goes dead until you thake your foot of the accelerator and then its perfect below 3000rpm. the car was perfect yesterday. what could ...
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.