Ford Bantam Questions Any type
Ford Bantam
Hi. My 2007 Ford bantam is giving me a problem, whenever I accelerate it flashes hazard lights. What could be the problem? Thanks
Ford Bantam 1300 Rocam Engine 2006 Workshop Manual Need To Check Why It Wil...
Trying to Assist a friend
Starting Problem
2007 Ford Bantam 1.6 rocam, the engin cranks but it takes awhile before it starts. When the engine is running it is running smoothly no problems. When the engin is switched off again it struggels to s...
Petrol Filter
In the Ford Bantam 1.3i, how to fit in a petrol filter?
Petrol Filter
In the Ford Bantam 1.3i, how to fit in a petrol filter?
Paul .Rocam 1.3 Car Starts, Battery Light Dies Not Show On The Dashboat How...
Paul .Rocam 1.3 car starts, battery light dies not show on the dashboard however alternator is not filling up the battery. Lights don,t come on.
Crankin/scratching Noise When Reversing
Hi I have a 2006 Ford bantam rocam, there is terrible noise happening when the car is reversing & apply brakes it crank like 2 metal or rusted irons scrach each other it comes from front left side t...
Ford Bantum
I have a Ford Bantum Rocam 1.3 it’s doesn’t want to rev but ones I remove the plug for the map sensor it revs and black smoke coming from the exhaust please help what’s wrong with my car
Rocam 1.3 2003 Model
My car was mixing water and oil. Took it to the engineers. The top engine was skimmed. The rings, valves and timing chain were replaced. Now when it starts it cant hold power. The foot needs to be...
Overheating
Hi my 1.3 ford bantam is getting hot,no water leaks. change thermostat and waterpump,no water in oil mixing everything looks ok. Motor is running good just getting hot. Is it head gasket and do i ...
Ford Bantam My Battery Light Has Been Going On For A While And Doesn't Want...
Ford bantam My battery light has been going on for a while and doesn't want to switch off, While i am driving. I replaced the alternator but the light is still on. What might the problem be?
Straight Swop
Ive got a 1.3 rocam and i want to swop it with a 1.6 rocam what do i need to do. Will the gearbox need replacing ect...
Over Heating
I have replaced a thermostat on my Rocam 2006 model but it's still over heating, a fan is not automatically start.
Bantam Overheating When It Wants To
My fan does not come on after removing the engine coolant temp sensor plug. My bantam also overheats. Some times it does some times it doesnt n when it does the radiator fan isnt running. I have ch...
Ford Bantum
am driving ford bantum the driver door does not open from the inside please help
Ford Bantam
I am battling with a Ford bantam 2011 1300xl. Above the back axel there's a pump or cylinder thing. It is leaking I have a photo is done one could help. To me it looks like a pin is missing
Torque Settings
What are the main bearing and bid end torque settings?
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.