Ford Bantam Questions Any type

  • Newest
  • Recently Active
  • Unanswered
225

Parts List Or Workshop Manual

As I have started a Ford Bantam Leisure web page to get as much info as possible on this vehicle it would be nice if anyone can help with a workshop manual, brochures, pictures, literature, specificat...

Ford Bantam 1.3 The Pulley Is Chewing The Fan Belt

Fan Belt Keeps On Jumping Out When Egine Is Running

How Do I Set The Timing On A Ford 1.6 Rocam Engine?

I have overalled the engine , but cannot get the timing right , is there an easy way off setting it . Lenasia

5

Overflow On Fuel Tank

Hi, would just like to ask if a Ford Bantam 1.3 Bakkie has an overflow pipe on the fuel tank that once the fuel tank is full it starts to leak onto the road? What is the maximum capacity of the fuel ...

195

Workshop Manual

Where can I find a workshop manual for my 1.6 XLT?

Is There Any Way One Can Overide The Bantam Security (pats) System? Petrol ...

45

How Does One Set The Ignition Timing On A Ford Bantam Pick Up?

My 2006 1.6i ford pick up pings under mild load from about 3000r/min upwards only when the weather is hot. Engine temp registers as normal. It has a new thermostat (genuine ford part). Sometimes, if I...

5

Accessories For My Ford Bantam 2006

Does anybody know where to get a roll bar and nudge for a my 2006 bantam bakkie? Ford dealership are out of there minds with there prices.

1,235

2010 Ford Bantam, Revving Problem, Surges - HELP?

Hi Guys! Have a 2010 Ford Bantam 1.3i XL; bought it brand new and now has about 35000km on the clock with absolute no modifications done to it. I have an issue with this thing revving, regardless of...

70

Bantam Increases Rev's By Itself!

My Ford Bantam 1.3 2008 Model has a nasty problem... The rev's pick up by itself. It normaly iddles at about 1200 Rev's it goes up to almost 4000 by itself. This problem started after heavy rains. Doe...

75

Rear Brakes

There is a big nut in the center of the drum do i need to remove that nut before i can take off the drum? Also there seems to be what looks like a washer that covers the nut do i need to push those en...

2006 Ford Bantam 1.3 RoCam Engine

Hey All, Can anyone give me all the torque settings for this motor or direct me to a place where I can get them please? Greatly Appreciated

75

Why The Name Rocam Engine

Hi, I have a 1.3i Rocam engine, which is written on the tappet cover of the engine, i noticed that the tappet cover is also plastic? Could anyone please elaborate on this?

20

Left Wheel Shock Rubber

The bakkie is pulling to the left and after 2000km the tyre need replacement. I took the bakkie to Ford and they cant find anything wrong. Tyger wheel and Tyres make some adjustments but the bakkie is...

Brakefluid Leaks

My Ford Bantam leaks brakefluid at the rear i think its called the brake equilizer.How do you repair it ?

70

Fuel Consumption Problem

Hi I have a huge problem at hand. I own a 1.3 Bantam 2008 model. I use to ged 13km to a litre of petrol. Lately I have been getting 5km to a litre. I have changed and re-gaped the plugs properly, I ha...

Ford Bantam Cuts Out

My ford bantam cuts out when I drive on gravel roads. I think it could be the emergency fuel cut-off switch. Where is this situated?

Bantam Cuts Out When Turning Right, Why?

Where Is The Indicator Unit Or Relay

Shortcuts

Ford Bantam Experts

  • #1
    Guru97FK8
    Reputation
    6,100
  • #2
    Janus Welgemoed
    Reputation
    1,020
  • #3
    AB Zaviour
    Reputation
    860
View All

Find great deals from top-rated dealers

Search

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.