Ford Bantam Questions Any type
Want To Know The Model
How can know what model is my Bantum. Can an Engine No. help ?
Ford Bantam
ford bantam 1.3 rocam, i have replaced the oil pump, but when the engine is hot the oil light stays on and funny noise when idling , but when the engine is cold runs smooth
Where Does The Fuel Idle Screw Sit On A Ford Bantam 1300 ?
Where does the fuel idle screw sit on a ford bantam 1300i ?
Overheating On My 2015 Bantam XLE
My Bantam 1600 XLE 2005 keeps overheating the past few months. The heat gauge shows normal but the engine temp on the block near the water pump rises to 80 deg C and the water temp from the radiator...
How Do I Connect The Knock Sensor To The Computer
how do I connect the knock sensor to the computer on my ford bantam 1600 rocam
Ford Bantam
Hi all my ford bantam drove perfect till i had a burst water pipe it stood for a year and i finely replaced the pipe now it wont start it cranks over but i got no spark and no fuel can anyone please...
Bantam Doesn't Start
hello.my ford bantam 1.3 doesn't want to start ,but there is petrol flow, sparks plugs spark, starter turns,timing is on point. what could be wrong.
Fan And Charge
Hi guy's I have ford bantam 2004 rocam 1.3. radiator fan doesn't run and as l know is automatic.It also not charging the Better but when l unplug one terminal the engine is running and it doesn't h...
I Have A 2004 1.3 Rocam It Was Running The Other Day, Now It Wont Even Spar...
My 2004 Ford Rocam 1.3 won't start, it was running then all of a sudden nothing. the ignition lights come on, but nothing else, battery is charged, iv'e checked all the wires nothing loose.....
Ford Bantam
Searched for: i have a ford batam 2006 1600 rocam the engine has been done , it pings when i ref it , it does nor have a knock sensor and no wiring can i take wiring to the computer and put a knock se...
Ford Bantam Brakes
Hi, I have been having major issues with the brakes. I have changed the master cylinder and equalizer, I am not losing brake fluid. I have to bleed the brakes every week as it goes right down, the o...
No Power
Hi I have a problem with my ford rocam 1.3 the car just turn its self on and now it doesn't want to start when I turn on the ignition
Ford Bantam 1.3 Rocam
Stater turns the motor for 3 to 4 times fuel pump is working enoungh spark and still does not start
Starting Problems
hi i have a ford bantam 1.6 carburetor motor. The car only starts when it is cold , but as soon as the temperature rises the engine just stops running.
What Is Size Of Crank Pully Bolt 14mm Xxxx
b3 1300 motor size crank pulley bolt metric 14mm x
Want To Know The Model
How can know what model is my Bantum. Can an Engine No. help ?
Water Bottle
My water bottle keep on cracking what can be the reason behind that? Ford bantam 1.6 rocam
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.