I cant find the part # for the vacuum mode switch for my 84 C10 with A C, any one have an idea?
1984 Chevrolet C/K 10 Silverado LB RWD
-
Maintenance & Repair
The heat riser is working.Its a 350 create engine .Vacuum is very hard coming in through the valve cover breather tube .the PVC is working fine. Its a four carb.with a edlebrock intake.
1978 Chevrolet C/K 10 Custom Deluxe RWD
-
Maintenance & Repair
I have a 1981 chevy k10 pickup , I replaces the gauges that the previous owner installed and put new volt meter on pluged it in the fuse box . And the light switch in the fuse box too the auxiliary...
1981 Chevrolet C/K 10 4WD
-
Maintenance & Repair
My turn signals are solid when I flip the left or right blinker but my hazard lights are working properly. I have replaced the turn signal switch and checked the fuse it is still good. This just st...
1983 Chevrolet C/K 10 Scottsdale RWD
-
Maintenance & Repair
As far as I know the clutch is good. There is no noise or odor that indicates to me the clutch is bad, but I don't know for sure it could be I'm no expert on clutches. How can I know for sure if it ...
Chevrolet C/K 10
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.