There are two coolant sensors, one for the dash gauge, and one for the engine computer. The one that matters is the ECT, engine coolant temp sensor for the ECU. That is the one that tells the fans when to come on. Can you confirm the fans are turning on when engine is hot? Also, how did you check the head gasket? Block Tester? Compression test?
I have Chrysler 300 2012 and over heating is not the water pump,thermostat
2012 Chrysler 300 S V6 AWD
-
Maintenance & Repair
So my fans don't turn on but when I unplug the connection it turns on. I know the fans work because by placing copper wire where the relay goes it turns on. I just don't know why even after running th...
2007 Chrysler 300
-
Maintenance & Repair
I have changed the water pump,thermostat,coolant senor,the fan work and it not the head gasket,radiator also it runs fine while ideling but runs hot when running need help
2012 Chrysler 300 C AWD
-
Maintenance & Repair
he keeps over heating while the car sits for a while but once i start driving it cools down.
2005 Chrysler 300 C RWD
-
Maintenance & Repair
I have a 2006 Chrysler Sebring and I have put a new water pump and thermostat I have bleed the water and it's still over heating can someone please help me try to figure it out
2006 Chrysler Sebring
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.