Asked by Tia Jan 05, 2020 at 03:44 AM about the 2007 Ford Explorer Eddie Bauer 4WD
Question type: Maintenance & Repair
I have scanned it with the obd. Changed all
related parts for all the codes. Yet. It still
keeps coming back. I've reset it from the obd,
disconnected the battery. It still comes back
and the codes what else could it be?
I have scanned it with the obd. Changed all related parts for all the codes. Yet. It still keeps coming back. I've reset it from the obd, disconnected the battery. It still comes back and the code...
2007 Ford Explorer Eddie Bauer 4WD
-
Maintenance & Repair
My 2000 Ford Explorer Eddie Bauer started to shutter and wouldn't go over 45mph my check engine light started blinking off and on then I smelled something burning like burnt wires and sulfur. After I ...
2000 Ford Explorer Eddie Bauer
-
Maintenance & Repair
How can clear a code po108, “manifold absolute pressure barometric pressure sensor, is this really a part or just a signal
2007 Ford Explorer Eddie Bauer
-
Maintenance & Repair
When it warms up it smooths out and the gas mileage is now really poor. The engine light then goes from solid to blinking
1997 Ford Explorer 4 Dr Eddie Bauer SUV
-
Maintenance & Repair
i have a 2004 ford explorer 4.0 and i went to start it and it wouldn't start. so i changed the fuel filter and unplugged the battery; then i plugged the battery back in; and it wouldn't start. i fin...
2004 Ford Explorer XLT V6 4WD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.