It is real and you probably need to replace the sensor.
Techno-mage answered 4 years ago
Might also be a vacuum leak. Don't replace the sensor without verifying. How does the vehicle run and idle?
Even if the code is cleared with the proper analyzer, it will return when the fault is detected by the PCM/ECM again.
How can clear a code po108, “manifold absolute pressure barometric pressure sensor, is this really a part or just a signal
2007 Ford Explorer Eddie Bauer
-
Maintenance & Repair
I have scanned it with the obd. Changed all related parts for all the codes. Yet. It still keeps coming back. I've reset it from the obd, disconnected the battery. It still comes back and the code...
2007 Ford Explorer Eddie Bauer 4WD
-
Maintenance & Repair
Will a 2002 Ford explorer fuel pump module work in a 2007 Ford explorer?
2007 Ford Explorer XLT
-
Maintenance & Repair
I have a2006 Explorer that was totaled but the engine is good. I found a 2005 Ford Explorer with a bad engine can I change them out to make 1 car
2005 Ford Explorer Eddie Bauer V6 4WD
-
Maintenance & Repair
i have a 03 explorer won't start but i have head lights hi and low and tail lights as well as brake lights. No power inside the suv and the side mirrors still move
2003 Ford Explorer XLT V6 4WD
-
Maintenance & Repair
CarGurus has 1,794 nationwide Explorer listings starting at $2,888.
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.