check your ignition control module also your coil to see if you got spark. also if you just replaced all of that. have you unhooked the battery to reset the computer? if not. you need to do that then things with be fine.
Sound like your getting spark now check fuel pressure make sure your getting fuel. Get under the truck an bang on the gas thank while someone starts the truck
I have replaced the cam sensor, distributor cap, fuel sensor, and it still does it. there is no code that comes up when this happens either
2001 GMC Sierra 2500HD 4 Dr SL 4WD Extended Cab LB HD
-
Maintenance & Repair
I HAVE A 2000 GMC WITH A 6.0 IN IT. THE BATTERY LIGHT COMES ON IN THE INFORMATION CENTER IN THE DASH , THE MOTOR DIES IT JUST QUITS NO STUMBLE NOTHING JUST DIES. HOW EVER YOU CAN RESTART THE MOTOR ...
2001 GMC Sierra 2500HD 4 Dr SL 4WD Extended Cab LB HD
-
Maintenance & Repair
I checked the grounds and voltage they both seem good. I also swapped relays and they are good. I'm stumped.
2003 GMC Sierra 2500HD SLT 4WD Extended Cab LB HD
-
Maintenance & Repair
Truck with stall and then sometimes start right back up sometimes have to crank several times before it started. Replacedfuel pump and fuel filter still crank but no start.
2003 GMC Sierra 2500HD SLE Crew Cab SB HD
-
Maintenance & Repair
No vibration 75 mph down. Its not the tires as i just got them rotated and balanced. Its not the transfer case or drive shaft as i got both new last year (2014). As soon i let off the gas the vibratio...
2002 GMC Sierra 2500HD 4 Dr SLE 4WD Crew Cab SB HD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.