Stalling related to fuel

Any applicable trouble codes? Your obd1, you should be able to check some codes, yourself, if the check engine lite still works. You connect a jumper wire between the terminals A and B at the datalink connector, then turn key just till the dash lites come on, then the mil on the dash starts flashing, you count the flashes to get the codes. Your looking for two digit codes. Because you mentioned fuel, the fuel pressure for 3.1L engine says 40--47 psi, so if about in the middle should be ok. If intermittent issues, have to test when problem is ongoing, I know it's a pain. If dis ignition, there is the ignition module and crank sensor. Don't replace anything unless your testing points in that direction. I hate to see you replace something and it doesn't fix it? I know, intermittent problems can be a pain to track down. We need something to point us in the right direction? I can only help with testing.