I took apart a headlight mtotor actuator and found a small ball bearing in it, where does this bearing go?

Asked by matador May 01, 2007 at 12:14 PM about the 1990 Chevrolet Corvette Coupe RWD

Question type: Maintenance & Repair

I took apart a headlight motor actuator and while doing so, a samll bearing fell from somewhere, is it possible this bearing go on the adjustment screw? please coment, thanks

LouB answered 16 years ago

Hi Matador! It is possible that the adjustment screw was the source of you bearing but it's hard to specifically pin it down based on what you have told us. You best and quickest answer may come from your local Chevy Service Manager. Good luck!

1 people found this helpful.

Mark helpful

Your Answer:

I took apart a headlight mtotor actuator and found a small ball bearing in it, where does this bearing go? 1 Answer

I took apart a headlight motor actuator and while doing so, a samll bearing fell from somewhere, is it possible this bearing go on the adjustment screw? please coment, thanks

1990 Chevrolet Corvette Coupe RWD

-

Maintenance & Repair
I have an 81 corvette w/43k miles. Excellent /original cond. I had it stored for 18mths. I heard a knock in it and dealer says the cam shaft needs repair. Is this worth it? 16 Answers

hello sir, I have a 1981 corvette. It is all original with about 44k miles on it. I had it stored for about 2 years. I took it to the dealership for an oil change and I heard a knocking in the moto...

1981 Chevrolet Corvette

-

Maintenance & Repair
I have a 1986 Vette, all of a sudden it revs very high and won't go down any. What can the problem be? 1 Answer

My 1986 Vette is having a problem all of a sudden when I start it it runs really.high, 2400 rpms. And it doesn't go down. The only thing I have done is spray some WD40 on the accelerator cable.

1986 Chevrolet Corvette Coupe RWD

-

Maintenance & Repair
I just bought a 2000 corvette 6 speed and it will roll on a steep grade in first gear. The cylinder compression is between 170-180psi and the clutch is holding firm, not slipping. Is this normal for an LS1 6 speed? 1 Answer

The car has 79,000 miles and is in great shape. The car was a one owner and driven most of the year in southern Ohio. Except for the heater fan making a little noise and the brakes needing changed thi...

2000 Chevrolet Corvette Coupe RWD

-

Maintenance & Repair
Does this sound like a starting selinoid? 1 Answer

I pressed the " Start" button, and the car made a sound like the starter was "hanging up." Before I could press the "off" button, the car started and in gear made a "clicking sound" while moving. The...

2007 Chevrolet Corvette Coupe RWD

-

Maintenance & Repair

Used Chevrolet Camaro

16 Great Deals out of 469 listings starting at $11,749

Used Ford Mustang

41 Great Deals out of 1,627 listings starting at $5,977

Used Porsche 911

17 Great Deals out of 225 listings starting at $22,980

Used BMW M3

8 Great Deals out of 77 listings starting at $14,995

Used Ford F-150

310 Great Deals out of 13,812 listings starting at $3,800

Used Toyota Supra

50 listings starting at $55,995

Used BMW 3 Series

68 Great Deals out of 1,212 listings starting at $2,500

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.

I took apart a headlight mtotor actuator and found a small ball bearing in it, where does this bearing go?

1 Answer

Your Answer:

Shortcuts

Search Chevrolet Corvette Questions

CarGurus Experts

Find great deals from top-rated dealers

Related Models For Sale

I took apart a headlight mtotor actuator and found a small ball bearing in it, where does this bearing go?

1 Answer

Your Answer:

Related Questions