littlehorn answered 16 years ago
If it's like other Chrysler products, you have to loosen the pulley bolt (located through the center of the pulley) as well as a throughbolt that runs perpendicular to the pulley bolt located behind the pulley. The throughbolt will loosen the tension on the belt, but you have to loosen the pulley bolt first.
2000 Jeep Grand Cherokee Limited
-
Maintenance & Repair
how to remove front and back seats 2005 grand cherokee
2005 Jeep Grand Cherokee Laredo
-
Maintenance & Repair
My jeep started up fine but whille driving and had to stop for a light the jeep sputtered and turned off. After removing the jeep to a safe place we opened the gas cap and a lot of water came from the...
2004 Jeep Grand Cherokee
-
Maintenance & Repair
So last weekend, I was driving home and a heard a clunk under the hood. thought maybe I ran over something. Turning the car was almost impossible. within 2 minutes my car over heated and things went...
2004 Jeep Grand Cherokee Limited
-
Maintenance & Repair
Do you just switch the transfer case? Is there a direct fit? Wiring? How to guide?
1996 Jeep Grand Cherokee
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.