joecorvair answered 16 years ago
Yes, the Macpherson strut and then you also probably have to pry the lower control arm down.
joecorvair answered 16 years ago
P.S. Mark where the strut bolts are positioned in case they are used for wheel alignment.
i can't get the drive out of the spindle. theres not enough room to pull it through. do i have to unbolt the shock to let the spindle drop?
1997 Chevrolet Cavalier
-
Maintenance & Repair
My accelerator cable broke (snapped in half). I'm trying to remove it from the pulley apparatus that operates the air intake so I can put on the new one (The very end of the engine side of the acce...
Chevrolet Cavalier
-
Maintenance & Repair
Atempting to remove sparkplug, it broke in socket. When I removed plug, parts of porcelin from thethe plug fell back into the hole and into the piston chamber.
2000 Chevrolet Cavalier Sedan FWD
-
Maintenance & Repair
How do I stop the alarm from going off and alarm light from blinking and the car will not start
1998 Chevrolet Cavalier Sedan FWD
-
Maintenance & Repair
I thought there was air in my line so I cracked the bleeder valve and now I cant figure out how to bleed it. My clutch pedal either goes up or down like a light switch there is no pressure what so ev...
2002 Chevrolet Cavalier
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.