Lean code

Asked by Robert Feb 04, 2016 at 05:47 PM about the 2000 Ford Windstar LX

Question type: Maintenance & Repair

Every place the Palladium seals on the upper and
lower portion of the intake and I've also replace the
grommets on both valve covers and I'm still here in
a vacuum leak however it seems to be coming
from the rear and I'm getting the lean code po174
and I'm still not sure why I'm getting the code if
after I've done the tune up and I replace the seals

1 Answer
220,935

Rowefast answered 8 years ago

P0174 FORD - Fuel Injection System Too Lean Bank 2.... Possible causes - Intake air leaks - Faulty front heated oxygen sensor - Ignition misfiring - Faulty fuel injectors - Exhaust gas leaks - Incorrect fuel pressure - Lack of fuel - Faulty Mass Air Flow (MAF) sensor - Incorrect Positive Crankcase Ventilation (PCV) hose connection Tech notes The codes is usually set when there is an intake leak after the air flow meter, before replacing any parts check for loose or broken hoses and intake gasket leak. On Ford some models dirty air filter, and dirty or faulty air flow sensor are the cause of the problem. It's a very common problem for the Ford Windstar. 1999-2003 Fords Windstar Code P0174. The problem is with the rubber grommets in the intake manifold bolts they will crack and cause an intake leak.

Mark helpful

Your Answer:

Related Questions

  • Lean code 1 Answer

    Every place the Palladium seals on the upper and lower portion of the intake and I've also replace the grommets on both valve covers and I'm still here in a vacuum leak however it seems to be comin...

    2000 Ford Windstar LX

    -

    Maintenance & Repair

  • How Can I Adjust the miture from too lean to more rich . 2000 3.8 6 Answers

    y Cyl 1& 5 reads too lean misfire. Is their a adjustment screw to make the mixture right.

    2000 Ford Windstar

    -

    Maintenance & Repair

  • my check engine light came on and i got the code P0104, need a check list for this 3 Answers

    My check engine light to my 2001 ford windstar came on, I have run a diagnostic on it and got the code P0104, could really use a check list as to what is causing this problem and would this code be ...

    2001 Ford Windstar LX

    -

    Maintenance & Repair

  • Diagnostic trouble code 1 Answer

    What does code p1309 "misfire detection monitor not enabled" mean?

    1998 Ford Windstar 3 Dr GL Passenger Van

    -

    Maintenance & Repair

  • running lean 1 Answer

    sputters while taking off

    2002 Ford Windstar LX

    -

    Maintenance & Repair

Shortcuts

Search Ford Windstar Questions

CarGurus Experts

  • #1
    Earl Garris
    Reputation
    1,070
  • #2
    Ficarri
    Reputation
    770
  • #3
    JohnBarJB
    Reputation
    730
View All

Find great deals from top-rated dealers

Search

Related Models For Sale

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.