A transmission that can handle the torque along with a heavy duty rear axle and suspension along with a good cooling system - for starters.
Measure the engine bay to make sure it'll sit You'll have to probably add a couple of motor mounts. Beef up the suspension, bigger driveshaft, rear-end, radiator
What would it take to put a 572 in an 88 c/k 1500
1988 Chevrolet C/K 1500 Cheyenne 4WD
-
Car Customization
Is any cutting required? If so what needs cut? Or will it just bolt on?
1995 Chevrolet C/K 1500 Silverado Extended Cab 4WD
-
Car Customization
I am looking for a diff locker that will install into factory diff with no major mods prefer remove change some parts and reinstall. (no messing with adjusting the diff after) Ocasional off road use b...
1994 Chevrolet C/K 1500 Silverado Extended Cab 4WD
-
Car Customization
i put the vortec heads n intake on the old 350 block n i am told that i will also need to change the crank sensor?? if yes or no and if anything else needs to be switched
1997 Chevrolet C/K 1500 WT RWD
-
Car Customization
I have a 94 Chevy Cheyenne with a 4.3 and want to swap to a 350 What do I need to do to comply with California emissions laws
1994 Chevrolet C/K 1500 Cheyenne RWD
-
Car Customization
CarGurus has 5 nationwide C/K 1500 listings and the tools to find you a great deal.
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.