1998 Chevy 1500 4x4 350 5.7

Asked by Countrywide09 Jan 03, 2017 at 04:59 PM about the 1998 Chevrolet C/K 1500 Silverado 4WD

Question type: Maintenance & Repair

I am having trouble trying to figure out why my
trucks not starting I've changed the coil pack
changed the ICM and I've done rotor cap and
button also stuck a screw driver in the plug wire to
see if I have spark and also put gas in the carbrator
and fuel pump is on and changed the fuel filter
also every time it rans it does this then some times  
it will start after I mess with it for a while

1 Answer
221,105

Rowefast answered 7 years ago

Do you have spark then? You may have a fuel problem, I would check the fuel pressure with a gauge and also do a bleed down test. You build up pressure on the gauge, turn the key off and watch the gauge to see if it drops. Should not drop more than 5 lbs in 3 minutes. If it does then the spider injection is leaking and would need to be replace. Fuel pressure on that one is 56 to 63 lbs. You get under 50 lbs and she will not start.

Mark helpful

Your Answer:

Related Questions

  • 1998 Chevy 1500 4x4 350 5.7 1 Answer

    I am having trouble trying to figure out why my trucks not starting I've changed the coil pack changed the ICM and I've done rotor cap and button also stuck a screw driver in the plug wire to see ...

    1998 Chevrolet C/K 1500 Silverado 4WD

    -

    Maintenance & Repair

  • 1998 Chevy 1500 4x4 5.7 auto 2 Answers

    I bought this truck non running and it has electrical problems. I'm only getting a large click sound from the starter . I removed the starter and had it tested and it's good , I tightened all bolts...

    1998 Chevrolet C/K 1500 Silverado Extended Cab 4WD

    -

    Maintenance & Repair

  • 1988 Chevy 1500 350 5.0l 1 Answer

    Why is it when I try to crank my 1988 Chevy 1500 350 5.0l it will pop back out the throttle body and catch on fire

    1988 Chevrolet C/K 1500

    -

    Maintenance & Repair

  • light duty or heavy duty suspension on a 1989 Chevy k1500 5.7 350 4x4 for front end wheel bearing assembly 2 Answers

    I have a 1989 Chevy k1500 5.7lt 350 4x4, that a front end wheel bearing has gone out on. I need to know if it is light or heavy duty, how do you find this information?

    1989 Chevrolet C/K 1500

    -

    Maintenance & Repair

  • 1994 Chevy 4x4 1500 5.7 2 Answers

    If I start my truck in the morning it fires right up and drives fine till it warms up then is shutters and bogs out but doesn’t die but if I’m going slow like turning in to somewhere it might die ...

    1994 Chevrolet C/K 1500 Silverado Extended Cab 4WD

    -

    Maintenance & Repair

Shortcuts

Search Chevrolet C/K 1500 Questions

CarGurus Experts

  • #1
    Andrew Olsen
    Reputation
    15,790
  • #2
    Rowefast
    Reputation
    9,520
  • #3
    John Saffrahn
    Reputation
    6,430
View All

Find great deals from top-rated dealers

Search

Related Models For Sale

Used Chevrolet Silverado 1500
173 Great Deals out of 7,285 listings starting at $6,995
Used GMC Sierra 1500
145 Great Deals out of 7,761 listings starting at $4,944
Used Ford F-150
298 Great Deals out of 13,634 listings starting at $3,888
Used Chevrolet Silverado 2500HD
23 Great Deals out of 1,548 listings starting at $5,990
Used Chevrolet C/K 2500
2 listings
Used Chevrolet Camaro
17 Great Deals out of 475 listings starting at $11,999
Used Dodge RAM 1500
3 Great Deals out of 87 listings starting at $5,000
Used Chevrolet Tahoe
16 Great Deals out of 786 listings starting at $7,499
Used Toyota Tacoma
39 Great Deals out of 825 listings starting at $9,975
Used Chevrolet C/K 3500
1 listing

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.