Interior lights and guages not working

Asked by Jtruman75 Feb 13, 2021 at 12:18 AM about the 1984 Dodge RAM 150 4WD

Question type: Maintenance & Repair

Just replaced the torque converter on my dodge and
now when I turn the key on I have no dash cluster
illumination, buzzer, turn signals, hazards, and none of
my guages work. Checked each fuse with a test light
and they are all showing good. I have no idea what's
wrong I feel like I've tried everything besides ripping
the whole dash apart

1,800

Carpentar answered 3 years ago

Check the red lead off of battery (not the battery cable) the one w the connector between battery and truck for corrosion as it sits just below the battery this is the main ignition feed to ignition s w. .

Mark helpful

Jtruman75 answered 3 years ago

Red wire was good. Found that the green/black ground wire that sprouts off the starter relay ground was not getting good connection. Now I have very dim dash lights and a right rear turn signal. Still no hazards or guages

Mark helpful