Hornet_2497 answered 5 years ago
Transmission pans don't usually have a drain plug so you will have to drop the whole pan (20 bolts?) to get it to drop. There will be about five quarts of fluid there and it will start to run out soon as things are loose. Change the filter and wipe out the pan while you're in there.
Where is the transmission fluid drain plug located in 1996 chysler Sebring jx
1996 Chrysler Sebring JX Convertible FWD
-
Maintenance & Repair
clutch needs changed and i'm having an issue get the transmission to separate from the motor. i've read the throw out bearing needs unclipped from the pressure plate but i can't figure it out. any h...
2002 Chrysler Sebring LXi Coupe FWD
-
Maintenance & Repair
where to add transmission fluid when no dipstick
2008 Chrysler Sebring Limited Convertible FWD
-
Maintenance & Repair
Tranny started slipping then I lost reverse so I changed the fluid and filter and now it goes forward just fine through all the gears but still no reverse
2005 Chrysler Sebring Touring Sedan FWD
-
Maintenance & Repair
my car was shifting hard into third gear and i checked the trans fluid to notice it was low. i added a half quart of mercron and my car started acting up horribly having a hard time shifting into any ...
1999 Chrysler Sebring LXi Coupe FWD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.