Heater not working
Asked by GuruX6P15 Nov 17, 2018 at 02:21 PM about the 2010 Dodge Avenger SXT FWD
Question type: Maintenance & Repair
2010 Avenger. Heat worked fine one
day. Was blowing cold air the next.
Fiddled with the temp control knob
and it started working. Now, it doesn't
work at all, only blows cold air. Fillef
with coolant. Both heater core lines
are hot. No noticeae leaks. Any
advice appreciated.
4 Answers
The heater is only blowing cold air
I had the same issue as everyone else - no heat on the left side of the car: replaced heater core, actuator, blend doors (all), thermostat, flushed 3 times, multiple shops and dealership could not resolve. THERE IS A CURRENT ATTEMPT TO START A CLASS ACTIONS LAW SUIT AGAINST FIAT CHRYLER BUT MORE PEOPLE TO FILL OUT A FORM TO GET IT GOING! Lawsuit Investigation: Jeep, Dodge Heating & AC Problems: https://www.classaction.org/jeep-wrangler-air-conditioning-heater-lawsuits "Attorneys have reason to suspect that Fiat Chrysler failed to properly flush the casting sand out of the engine blocks on some of its cars when they were made. It is believed that, as a result, the residual sand can circulate throughout the cooling system and settle as a “sludge-like” residue in the heater core, radiator and oil cooler. This is what may be causing the heating and cooling systems to malfunction and fail. "
How do I sign up for this like honestly my 2014 Dodge avenger heater has stopped working
Every winter my dodge avenger's heater stops working. I've had the heater core replaced,the thermostat. The blend doors flushed the system. It started working last winter. Now again it started blowing cold on the passenger side and now no heat at all. I've spent so much money on this
