I have a2008 murcery Milan v6 with codes P0102,0113,0356,0355,0354,0353,0351. All the coils have been replaced and the manifold gasket replaced. Still shifting bad in 1 stu and 2nd geer .will the tran

Asked by GuruWCDLH Sep 15, 2018 at 10:40 PM about the 2008 Mercury Milan V6

Question type: Maintenance & Repair

The transmission control module supposedly needs to be changed to fix the
shifting problem and first and second it's getting a bunch of cones but he
coils have been replaced and the gasket manifold have been replaced the
only thing that's left is the transmission control module

7,455

Brian answered 5 years ago

Sometimes when modules or computers go bad they go coo coo and throw all sorts of codes and can send you on a wild goose chase. Often times the solder joints in the computer modules become brittle or were cold solder joints in the first place and just become worse over time. Not that it's related but didn't those cars have major issues with a electronic style steering columns? Anyway hope the new module does the trick. Good Luck!

Mark helpful

Your Answer:

I have a2008 murcery Milan v6 with codes P0102,0113,0356,0355,0354,0353,0351. All the coils have been replaced and the manifold gasket replaced. Still shifting bad in 1 stu and 2nd geer .will the tran 1 Answer

The transmission control module supposedly needs to be changed to fix the shifting problem and first and second it's getting a bunch of cones but he coils have been replaced and the gasket manifold ...

2008 Mercury Milan V6

-

Maintenance & Repair
AC question for 2007 Merc Milan, short trips AC blows cold, longer trips 1-2 hours AC works great for a while, the stops blowing cold and blows hot. If I cut the unit completely off, still driving, in 15-20 minutes, turn unit back on to AC, bingo, works great again for 1-2 hours. Of course, when taken to Mercury Dealer, they can't find a problem, it's working great, "if it anit broke we cant fix it". Yep, I know. Only does this on 1-2 hour trips. Help ! Was told it is a blower door problem. However, I hear water/ice sounds when turned off. Is it freezing up? Blower door? Help needed. 2 Answers

short trips AC works great, longer trips on road trip 1-2 hours, blows cold then all of a sudden blows hot. I have found through trial and arrow while driving same trip, shut off unit completely fo...

2007 Mercury Milan I4

-

Maintenance & Repair
Hi, I have a 2008 Mercury Milan. Last week my oil light would come once in awhile when I come to a stop. I got a oil change on Monday and today the oil light came on once when I came to a stop 3 Answers

Oil light comes on once in awhile when I stop.

2008 Mercury Milan V6 Premier

-

Maintenance & Repair
Why would the engine shake at idle and check engine light be on? 2007 Milan 3 Answers

After being warmed up the car runs fine but it is shakes and sounds like a fourwheeler when its running at first start up.

2007 Mercury Milan

-

Maintenance & Repair
What are these codes and any recommended fixes? 1 Answer

My Milan is throwing codes P0410, P0491 and P2258

2007 Mercury Milan I4 Premier

-

Maintenance & Repair

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.