2008 pt cruiser liftgate voltage test
The 2008 PT Cruiser liftgate is inoperative. I have checked the key FOB, drivers door and touchpad. All door locks work but the liftgate remains locked. I removed the trim and back panel and manually opened the lifgate. When I check the connector at the latch there's a constant 10.43vdc. I removed the actuator and applied 12vdc and the actuator worked as it's supposed to. I believe the voltage should be at 0vdc until the fob is depressed 2x and then it should be 12+vdc. Can anyone give me additional information.
https://www.google.com/amp/repairpal.com/r ear-hatch-will-not-open-withrear-hatch-touch- pad-733.amp
Hey Cometguy, thanks but you answered a question I didn't ask. There's no problem with the touchpad, it's been removed from the circuit. The problem is that there's a constant voltage at the latch. Since the actuator requires 10+ volts to flip the latch, this voltage should only be present for a second when the key fob or door lock has been depressed 2x to open the latch . Your link isn't active and gives a repairpal message "We looked everywhere and can’t find that page!"
Search Chrysler PT Cruiser Questions
Chrysler PT Cruiser Experts
#3Kelly Little AshfordReputation1,500
Related Models For Sale
Used Cars For Sale