enginecreator answered 6 years ago
One of the light socket is bad or a wire is bare and touching metal or another wire or switch is bad, basically you need to trace down all that is on that fuse to be sure, and check grounds or if any other items have been spliced into them or crossing each other.
My fuse pops every time I add a new fuse to the courtesy light section i cant figure out why.
1986 Pontiac Fiero GT
-
Maintenance & Repair
88 Fiero 2.5. Trying to put in a new fuel pump. I have the tank on the garage floor under the car. Is there some trick to getting the plug with the 3 wires off? It's not budging and I don't want t...
1988 Pontiac Fiero Base
-
Maintenance & Repair
Need fuse diagram (Fuel Pump fuse and relay) for 85 Pontiac Fiero GT
1985 Pontiac Fiero GT
-
Maintenance & Repair
What is a ball park price I would pay?
1985 Pontiac Fiero GT
-
Maintenance & Repair
V6 engine, Car runs great but after running car for a period of time, when stopping it starts to idle rough and cuts off, starts right back up with no problem, sometimes when put back in gear cuts bac...
1988 Pontiac Fiero Formula
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.