can i replace an individual bulb on my tail light pc board or do i need to replace the entire board?

can i replace an individual bulb on my tail light pc board or do i need to replace the entire board? 1 Answer

I need to know where my Camshaft centering sensor is located on my pickup, and how to replace it, can you help? It turns but does not start. 2 Answers

I've tried New fuel filter and new plugs but it still is not starting so I'm thinking the source of the problem is the Camshaft Centering Sensor, but I don't know where to find it on my truck, or how ...

Newb with a Q I have a 1996 chevy 1500 and need to take the bench seat out to work on the floor board. How hard is it and do I need special tools? 3 Answers

V6 engine 2 wheel drive (?) OLD truck Already had replaced radiator, upper oil seals (?) need to do the lower ones sometime the brake line broke this morning so that's coming up really soon. Need ...

My 99 k1500 suburban 5.7 liter 4x4 stays engaged n won't disengage the lights on the switch blink on of from 4h to 4l n then stays lit in 4h I have replaced the switch n the actuator in front and it still does the same thing before I replace the motor in the transmission is there anything else I can check or replace that is less expensive the used motor is 100 at junk yard my service 4x4 light was on n off now it stays on all the time any help will be well appreciated winter is here n I get stuck in my yard in 1" snow all the time thank you 1 Answer

Stays engaged in 4h changed the switch n actuator n still same problem what else can it be I think the motor in tranny is good if its staying engaged does it mean the motor in tranny that engages is...

I have a 95 ext can chevy truck and my tail lights and dash lights are out, what do I need to check to fix my problem? 1 Answer

It runs but the tail lights and dash are not on. Need answer how to fix this to get on the road.