Sounds like the wiring has a issue or clogged injector. Have a look at the connector plug and wiring. You could try a bottle of Techron before diving into the fuel rail. If you have a basic meter you can ohm test your injectors and compare readings. Good Luck!
Thank you. I replaced the fuel injector on cylinder #3 and fixing any connecting wiring now
I would like to know more about why or how my engine is at a rough idle and codes say po268 fuel injector my car sounds like it has a dead cylinder and rough idle,
2006 Hyundai Tiburon GT FWD
-
Maintenance & Repair
Cars been sitting for 6 months and just got it started today. It was running kinda rough but smoothed out now after running up and down the road for about 10 minutes I was coming to a stop sign and st...
2003 Hyundai Tiburon GT FWD
-
Maintenance & Repair
2004 Hyundai Tiburon GT FWD
-
Maintenance & Repair
2004 Hyundai Tiburon. 5 Speed. 100k miles(second motor) the first one ended up throwing a rod bearing. The cause I feel is something to do with the ticking noise. To eliminate reasonable suspicion...
2004 Hyundai Tiburon FWD
-
Maintenance & Repair
I am working on a 4 cylinder Hyundai 2.0L and recently did the head gasket. I have also installed a new timing belt, I have aligned the corresponding marks on the camshaft and crankshaft. It has a ...
2008 Hyundai Tiburon SE FWD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.