i have a 2001 chevy blazer with the 4.3. its 4 wheel drive and i need to replace the pan gasket and the front crank shaft seal what is the easiest way to do this and does the engine have to come out.

Asked by dgilchrist Jul 17, 2017 at 08:58 AM about the 2001 Chevrolet Blazer LT 4-Door 4WD

Question type: Maintenance & Repair

the pan gasket and front crank seal has to be replaced have heard that the engine needs to come out or it doesn't have to. just need to know how the easiest possible way.

60,445

Andrew answered 6 years ago

Engine comes out or front diff gets pulled

Mark helpful

Your Answer:

i have a 2001 chevy blazer with the 4.3. its 4 wheel drive and i need to replace the pan gasket and the front crank shaft seal what is the easiest way to do this and does the engine have to come out. 1 Answer

the pan gasket and front crank seal has to be replaced have heard that the engine needs to come out or it doesn't have to. just need to know how the easiest possible way.

2001 Chevrolet Blazer LT 4-Door 4WD

-

Maintenance & Repair
I have 2000 Chevy Blazer LT that i wrecked in the front and trying to figure out what is interchangeable 7 Answers

I need inner core support radiator n fan headlights,grille,hood,fender and door. I was wondering if gmc jimmy interchangeable because i got one i could use all the parts off of it thanks

2000 Chevrolet Blazer LT 4-Door RWD

-

Maintenance & Repair
I have a 1995 s-10 Chevy Blazer with a 4.3 vortex engine,4wheel drive,auto trans. My question is why won't it start ? The only way to start it is to prime it first with gasoline or carb cleaner. 4 Answers

My 1995 s-10 Chevy Blazer won't start without priming with gasoline or carb cleaner.it has 4.3 vortex engine w/4wheel drive and an automatic trans. I've tested the fuel pressure and only get ab...

1995 Chevrolet Blazer LS 2-Door 4WD

-

Maintenance & Repair
I have a 1999 Chevy Blazer, 4x4, 4.3 vortec. We have changed the coil pack, fuel filter, distributor cap and button, the crank shaft sensor, cam sensor and plug wires as well as the ignition control module. We coming to a stop sign it will stall and sometimes when just sitting still. Sometimes it will start right back up and other times it takes several tries. I also have the oxygen sensor on order and it should be here tomorrow. Fuel pressure tested perfectly. No black smoke, no smell of rotten eggs or the cat glowing red. The only code that comes up is PO420. 4 Answers

I have a 1999 Chevy Blazer, 4x4, 4.3 vortec. We have changed the coil pack, fuel filter, distributor cap and button, the crank shaft sensor, cam sensor and plug wires as well as the ignition control m...

1999 Chevrolet Blazer 4-Door 4WD

-

Maintenance & Repair
I have a 01 Chevy Blazer with the 4.3 v-6... It appears to have a blown intake manifold gasket. There is oil in the coolant. No water in the crankcase. What's the easiest fix??? 3 Answers

As long as I keep putting coolant in it I get heat and it runs at the normal temperature..

2001 Chevrolet Blazer Xtreme 2-Door RWD

-

Maintenance & Repair

Used Chevrolet Trailblazer

17 Great Deals out of 1,347 listings starting at $18,995

Used Chevrolet Tahoe

16 Great Deals out of 786 listings starting at $7,499

Used Jeep Grand Cherokee

112 Great Deals out of 3,737 listings starting at $4,295

Used Chevrolet Silverado 1500

173 Great Deals out of 7,285 listings starting at $6,995

Used Toyota RAV4

142 Great Deals out of 3,046 listings starting at $5,995

Used Ford Explorer

65 Great Deals out of 1,827 listings starting at $7,412

Used Toyota 4Runner

23 Great Deals out of 528 listings starting at $7,700

Used Chevrolet Camaro

17 Great Deals out of 475 listings starting at $11,999

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.

i have a 2001 chevy blazer with the 4.3. its 4 wheel drive and i need to replace the pan gasket and the front crank shaft seal what is the easiest way to do this and does the engine have to come out.

1 Answer

Your Answer:

Shortcuts

Search Chevrolet Blazer Questions

CarGurus Experts

Find great deals from top-rated dealers

Related Models For Sale

i have a 2001 chevy blazer with the 4.3. its 4 wheel drive and i need to replace the pan gasket and the front crank shaft seal what is the easiest way to do this and does the engine have to come out.

1 Answer

Your Answer:

Related Questions