I have a 1986 chevy s10 2 dr std standard cab sb and I had to replace the engine ,I put a 1991 s10 motor in it but having problem with tbi

Asked by kattyg Mar 16, 2012 at 06:45 PM about the 1991 Chevrolet S-10 RWD

Question type: Maintenance & Repair

I have a 1986 chevy s10 2 dr std standard cab sb and I had to replace the engine ,I put a 1991 s10 motor in it but having problem with tbi My friend keith swaped it out for me he said the 91 tb did not have the right hook ups for my 86 truck so he put the 91 on and somehow made it work , well I went thru emmision testing and failed they said all my other readings were great but I failed the hydrocarbons it was too high he said to tell my mechcanic it was running too lean he said since all the other readings were good that it would probaly be a repair nota replace so now i took it to another friend of mine  because he only lives about a mile from me now he said he believes it is because of the tb and that i should get a 1991 tb and it should probaly fix the problem . I would like your opinion on it . it is my only transporation and I need so very bad  with putting in the engine and all the other parts  i need to get it running correctly and very depenable hopfully with not too much more expense I am on the road quite often locally but in phoenix that is alot of miles I am single and almost always drive alone. I have always cared for my vechiles I believe that if you take care of them they will take care of you ...and that has been pretty much true my whole life ...that is why it is soo important to get my truck running right  so any ideas you may have would help me greatly....THANK YOU SO MUCH FOR YOUR TIME AND HAVE A GREAT DAY!

1 Answer

4,935

I have a 2000 S-10 that has the OBD 2 system for the emissions. Without reading the manual on your 1986 model.It has the OBD 1 system.I would look at (if possible) using the tbi components from the 86 model.I'm assuming the other engine had internal problems. It sounds like that 91 tbi needs to be controlled by the newer system so the emissions will be in passing range. When you go for inspection.If the inspector inserts a probe in the exhaust pipe,that's for the OBD 1 system. I hope this helps.

Your Answer:

CarGurus Experts

  • #1
    Andrew Olsen
    Reputation
    9,720
  • #2
    Robert Smith
    Reputation
    3,350
  • #3
    Gene Arnett
    Reputation
    2,810
View All

Find great deals from top-rated dealers

Search

Related Models For Sale

Used Ford Ranger
24 Great Deals out of 699 listings starting at $8,999
Used GMC Sonoma
1 listing
Used Ford F-150
314 Great Deals out of 13,742 listings starting at $3,800
Used GMC Sierra 1500
132 Great Deals out of 8,251 listings starting at $3,000
Used Dodge Dakota
22 listings starting at $3,995
Used GMC S-15
1 listing
Used Chevrolet Camaro
13 Great Deals out of 468 listings starting at $11,749
Used Chevrolet Blazer
19 Great Deals out of 1,122 listings starting at $3,000

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.