ok guys, I tried to bleed it and couldn't get any water or air bubbles to come out of the bleeder screw. I had it unscrewed enough because I could see the whole in the bleeder screw. Also my fans didn't kick on until it got to the 3rd mark, then they shut off at the 210 mark. Any answers ?

ok guys, I tried to bleed it and couldn't get any water or air bubbles to come out of the bleeder screw. I had it unscrewed enough because I could see the whole in the bleeder screw. Also my fans didn't kick on until it got to the 3rd mark, then they shut off at the 210 mark. Any answers ? 1 Answer

Where is the bleeder screw on the rear brakes of a 2004 Grand Prix GTP? 1 Answer

I can not find the bleeder screw on the rear brakes of my 2004 GTP. Do I have to remove some plug and install a bleeder screw? If so, where is the plug, and how do you remove it? Thanks in advance.

Broken bleeder screw in caliper. 7 Answers

Broke bleeder screw in half. How do I get the other half out?

My reduce engine light come on Monday and I am trying to see what could it be. I had no problem up until that day. 1 Answer

My reduce engine light come on Monday and I am trying to see what could it be it started after I hit a bump in the road

Would it hurt anything if I took the thermostat out of my 2002 Pontiac Grand Prix long enough to get it home from work which is about 1 hr 15 min all highway. I believe the thermostat has failed close 4 Answers

The service engine light came on. P0128 code came up I checked coolant level it was good in radiate but very low in reservoir so I filled it up to the hot mark since I had just drove from.work and...