Won't start turns over
Asked by Gregory Jun 14, 2016 at 01:17 PM about the 2005 Chrysler PT Cruiser GT Wagon FWD
Question type: Maintenance & Repair
05 turbo Gt Ho pt cruiser while driving car
died and won't start I replaced map
sensor,cam shaft sensor checked fire and
trimming is good. Plugs are wet with gas
4 Answers
Have you had the timeing checked?May have jumped,if you have fuel and fire.
Had work done alternater belt replace and top motor mount replaced car started but low on gas put two cans of gas in wouldn't start
Simplefixfirst answered 4 years ago
Check the ignition switch first and foremost. Just fixed mine. Took the ignition switch apart and the contacts where black with electrical arc residue. This explains the intermittent starting. Used WD40 sparingly.Cleaned up the lock cylinder while I had it in my hand. It also works like new now. Problem fixed. Didn't cost a dime.
I'm in kinda. Same jam I can turn it over all day it seems but have fuel air and fire I swear it sounds like timing is bad but belt turns with gears. I squirt ether starter fluid in but no luck no fire up...... It. Drags badly when turning it sounds wierd. I did get it to fire up once after a whole can of ether ran goodish but got hot... This is why I suspect timing.
