firebird338 answered 5 years ago
Check for loose front wheel bearings if one or both are loose will cause brake pedal to go to floor.
They are both tight. Now do the truck have to off or on when bleeding the brakes?
Did you correctly bench bleed the master cylinder ???
1999 Chevrolet Silverado 1500 Extended Cab RWD
-
Maintenance & Repair
1999 Chevrolet Silverado 1500 4WD
-
Maintenance & Repair
I replace the brake calipers and the master cylinder on my 2005 Chevy Silverado 1500 5.3 liter and still cannot get brake pedal back I've bled the system there's times what else could it be
2005 Chevrolet Silverado 1500 Extended Cab RWD
-
Maintenance & Repair
I drove a good distance with my emergency brake down and they no longer work all the rest of my lights work except my brake lights and my third brake light
2000 Chevrolet Silverado 1500 RWD
-
Maintenance & Repair
Front brakes dragging and overheating pads causing smoke. Replaced both calipers. Pads were new with only 6k on them. Lines are all new.(stainless) new master cyl. System has been bled many times. New...
2006 Chevrolet Silverado 1500 LB RWD
-
Maintenance & Repair
CarGurus has 7,260 nationwide Silverado 1500 listings starting at $6,995.
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.