My Blazer 1997 will engagemang 4x4 hi but not 4x4 lo. When i start the card all Buttons Light up and then 2wd. And there is No problem to engagemang 4x4hi. But when i press lo Button notting happens

Asked by Jim Aug 20, 2018 at 06:39 PM about the Chevrolet S-10 Blazer

Question type: Maintenance & Repair

My Blazer 1997 will engagemang 4x4 hi but not 4x4 lo. When i start the car all
buttons light up and then 2wd, stays on. And there is no problem to
engagemang 4x4hi. But when i press lo button notting happens, not even a
Flash. And i have the gear in neutral.

Jim answered 5 years ago

Engagemang = engage

Mark helpful

Your Answer:

My Blazer 1997 will engagemang 4x4 hi but not 4x4 lo. When i start the card all Buttons Light up and then 2wd. And there is No problem to engagemang 4x4hi. But when i press lo Button notting happens 1 Answer

My Blazer 1997 will engagemang 4x4 hi but not 4x4 lo. When i start the car all buttons light up and then 2wd, stays on. And there is no problem to engagemang 4x4hi. But when i press lo button nottin...

Chevrolet S-10 Blazer

-

Maintenance & Repair
I have a 1999 blazer lt. Replaced trans motor, tccm, 4 button switch and finally atc fuse. I now have a service 4 wd code and when I start the vehicle the 4 button switch flashes and lights go out. 1 Answer

1999 blazer lt. Trouble occurred when I put transfer case in neutral. 4 button switch stopped working. Replaced tccm, 4 button switch and encoder motor. Still no lights on switch. Found fuse atc und...

Chevrolet S-10 Blazer

-

Maintenance & Repair
i have a 93 s10 blazer and my signal lights work when headlights are off, but iluminate but donot flash when headlights are on, and now if you turn them on, dash lights flash,brk lits stop all lits 2 Answers

when my head light are off my signal lites work, when they are on signal lites illuminate but do not flash, now when the signal lights r used all of the dash flashes, and if you hit the brakes, it sto...

Chevrolet S-10 Blazer

-

Maintenance & Repair
I have a 89 s-10 4.3 blazer. It is cranking over but not starting. I can smell gas after trying to start it. I also put my finger under neath the injector and it had gas. I hear the fuel pump turn on. 6 Answers

i rebuilt the throttle body a year ago. I did not put a new throttle position sensor.

1989 Chevrolet S-10 Blazer High Country 4WD

-

Maintenance & Repair
one button 4wd switch can't find one what is it called and where can I get one all I see is 3 and 4 button no 1 button need help 3 Answers

Just got this s10 blazer tahoe lt did not run fixed it but has one rocker button for 4wd but is cracked and faded can't read it where can I get one and what is the right name of it when I put the ye...

1994 Chevrolet S-10 Blazer

-

Maintenance & Repair

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.

My Blazer 1997 will engagemang 4x4 hi but not 4x4 lo. When i start the card all Buttons Light up and then 2wd. And there is No problem to engagemang 4x4hi. But when i press lo Button notting happens

1 Answer

Your Answer:

Shortcuts

Search Chevrolet S-10 Blazer Questions

CarGurus Experts

Find great deals from top-rated dealers

Related Models For Sale

My Blazer 1997 will engagemang 4x4 hi but not 4x4 lo. When i start the card all Buttons Light up and then 2wd. And there is No problem to engagemang 4x4hi. But when i press lo Button notting happens

1 Answer

Your Answer:

Related Questions