Your Answer:
Related Questions
-
i have a 2007 dodge ram 1500 5.7l v8, it ran perfectly up until today and i stopped at the store and went to start it back up after i got in and it would not start. It would turn over but was not getting fuel. i listened for the fuel pump to turn on and i did not hear it initiate. i looked for a relay but could not find one and i know it has to have one because i have one in hand that i bought. I have the slightly lifted fuse box under my hood, its not like most ofthe pictures that you see and i cannot jumper it from m7 to m25 because that it my reverse lockout and my power mirrors. i have already looked into that. Only thing i have not done so far is changed out the fuel pump and the relay but i cannot find the relay.Please help because i really dont want to change my fuel pump out...Thanks in Advance! 2 Answers
2007 Dodge RAM 1500
-
Maintenance & Repair
-
I parked my truck wednesday night and when I went out to start it on thursday morning it would not fire, the motor just keeps turning and turning. I didn't have a chance to look at it till that night. 2 Answers
I parked my truck wednesday night and when I went out to start it on thursday morning it would not fire, the motor just keeps turning and turning. I didn't have a chance to look at it till that night....
1999 Dodge RAM 1500 Laramie SLT Quad Cab LB 4WD
-
Maintenance & Repair
-
My 2005 Dodge Ram 4.7 is having trouble starting, it usually takes 3 attemps until it turns over. I suspected that it may be the check valve on the sending unit but I can find the part in online autopart stores which leads me to believe that it doesn't have one. Could it possibly be the fuel pump? 1 Answer
My 2005 Dodge Ram 4.7 is having trouble starting, it usually takes 3 attemps until it turns over. I suspected that it may be the check valve on the sending unit but I can find the part in online aut...
2005 Dodge RAM 1500 SLT Quad Cab RWD
-
Maintenance & Repair
-
I have a 2002 Dodge Ram 1500 4x4 4.7 Sport. I recently put in a new/used motor because my old one had a bad crankshaft. So after getting new motor in I started the truck and it ran great. I only ran it for about 5 seconds because I noticed I had a broken transmission line. I went back the next day and fixed the line. I went to start the truck back up and nothing happened. No click no nothing, everything lights up on dash. My engine light comes on and blinks about tens times than stays steady. My gear selections are all lit up. Does anyone know the do it yourself solution? 1 Answer
I have a 2002 Dodge Ram 1500 4x4 4.7 Sport. I recently put in a new/used motor because my old one had a bad crankshaft. So after many hours of getting new motor in, I started the truck and it ran gr...
2002 Dodge RAM 1500 ST Quad Cab LB 4WD
-
Maintenance & Repair
-
I have a 1998 Dodge ram 1500 just rebuilt the transmission and put it back in the truck. now the truck will turn over but will not start. 1 Answer
i replaced the cam shaft postion senor that did not work.. i am not getting spark but i am getting fuel and compression. i tested the battery it is still good..you can still hear the fuel pump kick on...
1998 Dodge RAM 1500
-
Maintenance & Repair
Shortcuts
Search Dodge RAM 1500 Questions
CarGurus Experts
-
#1Dan ConnellReputation19,890
-
#2dandyounReputation15,170
-
#3Gene ArnettReputation11,710
Find great deals from top-rated dealers
SearchRelated Models For Sale
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.