Ford F-100 Questions Maintenance & Repair
Fuse Panel Diagram
I am desperately seeking a diagram of the fuse panel for a 1980 Ford F100. The diagram has long since worn down, & is no longer decipherable.
What Do I Look At To Start Getting My Truck Running?
Hi, Thanks to anyone who is looking at this, I am wondering if anyone knows what to start looking at, (special emphasis on START) to getting my truck back into running condition. It is a '61 Ford, V8,...
Miss Fires
my 1972 ford f-100 with the stock 320 and two barrel in it that we rebuilt about a year ago misses around 65 mph. just had the timing set at a shop and new points put on. runs totally fine until about...
Instructions On 3 Speed Column Change Please
hi strange as it may seem I have replaced the plugs points condenser and repaired the low tension feed wire in the distributor,changed all the slave cylinders and the rear shoes. i have fired it up bl...
1979 F-100 Rear Bumper Replacement
I am attempting to replace an aftermarket rear step bumper with an original equipment chrome bumper. In attempting to order I am asked the distance between the center mount holes ( 361/2or 40" ). As...
Starter. I Need Help.
I have a 1967 Ford F100, the starter started to drag and I put a different starter in it. When I turned it over, it'd catch on the flywheel for a bit, and then kick off, what could be the issue? When...
What Can I Do About A Brake Bleeder Thats Stripped Off On The Front, Passan...
Didn't do the right thing. I didn't take the grease zerk off and take the bolt for the grease chamber off to get onto the bleeder right away and ended up stripping it off. Can't get on it with anythin...
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.