dynasg2009 answered 11 years ago
Check the solenoid on the transfer case, it's probably shorted internally. I wish Ford would have never gone to switch 4X4.
Mine did the same. The dealership found that the left front speed indicator needed replacement.
4wd hi range works in both hi & lo switch settings on dash. No lo range engagement of transfer case.
1998 Ford Explorer 4 Dr Eddie Bauer 4WD SUV
-
Maintenance & Repair
When i turn knob on dash to engage 4x4 hi, it works fine. When i turn knob on dash to engage 4x4 low, it stays in 4x4 hi range and the the light on dash continues to indicate hi range
1998 Ford Explorer 4 Dr Eddie Bauer 4WD SUV
-
Maintenance & Repair
what does it mean when both the 4wd lights are blinking
Ford Explorer
-
Maintenance & Repair
Checked all fuses. My anti theft system light on dash flashes quickly when I turn key to on. If it's the security system is there a bypass. Or a fuel reset. If so where.
2005 Ford Explorer XLT V6 4WD
-
Maintenance & Repair
Switch has been changed and window will still not roll up. Master switch on drivers side still works for all other windows but not for the front passenger side
2003 Ford Explorer XLT V6 4WD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.