auto belt tensioner

Asked by jamesgt Aug 28, 2016 at 04:58 PM about the 1998 Ford Escort 4 Dr SE Wagon

Question type: Maintenance & Repair

the auto belt tensioner on my 1998 ford escort wobbles back and fourth when
the engine is running I checked the belt the idler pulleys the drive pulleys all
are tight all run true am I missing something or is it normal I replaced the belt I
took the tensioner off and checked it it it tight and spins smooth any ideas

101,575

KenF answered 7 years ago

I'd still replace the tensioner. The pulley itself may be fine but not the spring tensioner, so it could be letting slack into the serpentine belt when it's running.

1 people found this helpful.

Mark helpful

4,045

gearheadRHINO answered 7 years ago

sounds like a UK car :), when was the tensioner replaced, it really should be replaced as and when the belts are, remove the belt and check for side to side movement. although you said it spins smoothly does not mean the bearings aren't worn out, a local garage may be able to sort this for around £50

Mark helpful