tom is correct and if that does not work i have seen instance where its the crank sensor (under the head frnt of motor pass side) without throwing check engine lite, but toms answer is the more obvious and first to check for vacuum leak, i just replaced mt idle control valve it was causing it to idle high, good luck!
2002 Jeep Liberty Sport 4WD
-
Maintenance & Repair
I just had the crand sensor replaced but my jeep is still stalling out on me...when i come to a stop my rpms drop..my lights will even dim...what could my problem be?
2002 Jeep Liberty Sport 4WD
-
Maintenance & Repair
Here's what I did to fix it. My '02 Liberty won't start when hot. All dash lights work, everything seems ok but the engine won't crank until it cools down. I replaced the starter (no fix), I replaced ...
2002 Jeep Liberty
-
Maintenance & Repair
I have an 04 Jeep Liberty Limited and a friend is giving me his 04 Jeep Liberty Sport, because my Jeep has some body damage that is going to be way too expensive to fix. The only thing is, the Spo...
2004 Jeep Liberty Limited 4WD
-
Maintenance & Repair
I have a Jeep Liberty Limited and when my truck starts acting up my windshield wipers won't come on, my headlights won't come on, my speedometer won't work, I can't lock/unlock my doors from my keycha...
2002 Jeep Liberty Limited 4WD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.