Coil not getting electricity
25

Asked by WiloXD Dec 26, 2019 at 07:19 PM about the 2004 Jeep Liberty Sport 4WD

Question type: Maintenance & Repair

2004 jeep liberty v6 3.7l
There is no electricity passing to the coil on cylinder 4 /D I
checked coil by plugging it in cylinder 1/A  and it works
but when plugged into cylinder 4/D coil won't give spark  
had a tester and wire have 12v continuum but won't give
spark please help
Code
P2311 ignition coil D primary/secondary circuit
The jeep has new
1. spark plugs
2. Coils
3. Ats (air temperature sensor)
4. Throttle position sensor
5. Crank shaft sensor

2 Answers

F_O_R answered 4 years ago

Look for a damaged wire or damaged coil connector.

3 people found this helpful.
Mark helpful
25

WiloXD answered 4 years ago

No its the pcm / emc on the jeep thx for the assist

2 people found this helpful.
Mark helpful

Your Answer:

Related Questions

  • Coil not getting electricity 2 Answers

    2004 jeep liberty v6 3.7l There is no electricity passing to the coil on cylinder 4 /D I checked coil by plugging it in cylinder 1/A and it works but when plugged into cylinder 4/D coil won't give...

    2004 Jeep Liberty Sport 4WD

    -

    Maintenance & Repair

  • How do I determine why I am not getting heat from my 2010 Jeep Liberty? 1 Answer

    I am not getting heat from my heater, though the fan or blower sounds like it is running fine, so I don't think it is the fuse. This happened suddenly, no prior noises or warning sounds, etc. The radi...

    2010 Jeep Liberty Limited

    -

    Maintenance & Repair

  • firing order and coil pack assignment 7 Answers

    The 3.7 L engine on my 2010 Jeep Liberty is a V6. I understand the firing order to b e 165432. This engine has coil packs not individual coils. How are the coil packs assigned to the cylinders? Does...

    2010 Jeep Liberty Limited

    -

    Maintenance & Repair

  • Found problem with #4missfire, plug now its back ,changed the coil still there what gives ? 1 Answer

    My 07 jeep liberty had a missfire code on #4 turned out.to be a bad plugs that had not been changed in 8 years, 2hrs later the problem returend so i replaced the coi ,and i tested all the other one...

    2007 Jeep Liberty Limited 4WD

    -

    Maintenance & Repair

  • started and shut off will not restart 1 Answer

    started and shut off will not restart

    2008 Jeep Liberty Limited 4WD

    -

    Maintenance & Repair

Shortcuts

Search Jeep Liberty Questions

CarGurus Experts

  • #1
    rst429
    Reputation
    3,100
  • #2
    fixmyjeep
    Reputation
    3,020
  • #3
    Gene Arnett
    Reputation
    1,970
View All

Find great deals from top-rated dealers

Search

Related Models For Sale

Used Jeep Wrangler
134 Great Deals out of 5,910 listings starting at $6,500
Used Jeep Grand Cherokee
127 Great Deals out of 3,648 listings starting at $4,295
Used Ford Escape
132 Great Deals out of 4,152 listings starting at $2,999
Used Ford Ranger
22 Great Deals out of 697 listings starting at $6,445
Used Ford F-150
319 Great Deals out of 13,512 listings starting at $3,888
Used Honda CR-V
196 Great Deals out of 5,043 listings starting at $440
Used Toyota RAV4
147 Great Deals out of 2,991 listings starting at $4,999
Used Toyota 4Runner
20 Great Deals out of 529 listings starting at $14,995
Used Nissan Xterra
22 listings starting at $7,799
Used Ford Mustang
35 Great Deals out of 1,603 listings starting at $7,999

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.