ABS telltale light on dashboard. This has already been diagnosed by Mazda service, they simply cannot source the part as it is no longer available. I am not asking for a diagnosis. The original question is about compatibility with the same part from a Ford Escape.
Will the ABS pump and control module from a 2010 ford escape fit a comparable 2010 Mazda Tribute? They both have a 2.5 liter inline 4 cyl with front wheel drive.
2010 Mazda Tribute GS
-
Maintenance & Repair
I took my car in for a check engine light. The shop diagnosed a valve temperature control sensor and pigtail was faulty. They order the parts and put in a new pigtail and noticed that connector was wi...
2006 Mazda Tribute
-
Maintenance & Repair
I have a 2002 Mazda Tribute ES 3.0 L V6 I need to change the intake manifold everything I've researched seems to point to the Escape, Mariner and Tribute sharing the same engine for this model ye...
2002 Mazda Tribute ES V6
-
Maintenance & Repair
I've checked the fuse which was good since it does work, but at the first and 2nd level the fan will not come on and at 3 the fan is too strong. any help or similar problems.
2010 Mazda Tribute
-
Maintenance & Repair
Started out my ABS light and my brake light will come on while I'm driving down the road well even at 50 miles an hour the car will stall what can cause it now I'm having a issue with my heat res...
2011 Mazda Tribute
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.
