beatupchevy answered about a year ago
Test or charge the battery or the parts store will , make sure batt. terminals are tight , If headlights are nice and bright it could be the starter , test for power at the solenoid wire when you hit the key
1998 could be an ignition switch, gear selector switch if it has and automatic transmission, clutch switch if a standard transmission, no power to starter solenoid or the starter due to wiring problems.
1998 GMC Suburban K1500 4WD
-
Maintenance & Repair
219xxx miles... was running just fine but died while driving. code read P1345= camshaft position sensor. i changed the camshaft position sensor, Timing Chain, reset timing chain and rotor in distrib...
1999 GMC Suburban K1500 4WD
-
Maintenance & Repair
I have a 96 GMC Suburban you turn the key on all the lights work but it will not turn over it does not click or anything it has a new starter and still nothing checked all the relays they are fine
1996 GMC Suburban K1500 4WD
-
General
I drove my suburban this morning and parked it.just tried to leave and it wont crank or start.all lights and radio comes on,but ignition does nothing,no click no crank.what should i check
1997 GMC Suburban C1500
-
Maintenance & Repair
No spark on 1997 GMC 2500 Suburban 454 cubic inch engine
1997 GMC Suburban K2500 4WD
-
Maintenance & Repair
CarGurus has 3 nationwide Suburban listings and the tools to find you a great deal.
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.