Asked by Jackdasavage79 Sep 02, 2016 at 07:03 PM about the 2004 GMC Yukon Base
Question type: Maintenance & Repair
Engine light came on my 04 GMC Yukon read crankshaft
position sensor I replaced it and had light the light cleared
manually drove about ten miles and light came back on
any segestions
Jackdasavage79 answered 7 years ago
Yes it is still sensor and yes it was an autozone sensor so you I need to get it from the dealer
Engine light came on my 04 GMC Yukon read crankshaft position sensor I replaced it and had light the light cleared manually drove about ten miles and light came back on any segestions
2004 GMC Yukon Base
-
Maintenance & Repair
The Service engine soon light appears on my 2002 GMC Yukon. Took it to Auto Zone for a read out and it read a P0300 code: Replace Fuel Pressure Regulator. After it was replaced the light went out f...
2002 GMC Yukon SLT
-
Maintenance & Repair
I have an 03 yukon an the abs an break light came on an it beeps then it tells me service brake system what can it be i think its a relay can some one help me
2003 GMC Yukon SLT
-
Maintenance & Repair
why my 96 yukon ABS light is always on, even i brought it to the mech. but it wont off?
1996 GMC Yukon SLT 4WD
-
Maintenance & Repair
I am aware of the LED brake light issue on my 2015 GMC Yukon but before purchasing the entire assembly wanted to check the fuse. The diagram in the owners manual does not clearly show where this f...
2015 GMC Yukon SLT 4WD
-
Maintenance & Repair
CarGurus has 972 nationwide Yukon listings starting at $3,000.
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.