They make a socket for removing and installing oil pressure sending units. Just unplug the wires and screw it out and put the new one in.
How do i change the oil sending unit
1986 Ford Bronco II XLT
-
Maintenance & Repair
i was being a dumb ass and drilled right through my wireing harness and caused a short. i fixed the wires that i cut, used a test light to test the wiring to the starter relay, tfi module and replaced...
1986 Ford Bronco II
-
Maintenance & Repair
My brother has an 88 bronco 2 that will not start when you turn the key. He has replaced the starter solenoid and the fuel pump turns on but when he turns the key it wont even crank.
1988 Ford Bronco II XLT 4WD
-
Maintenance & Repair
There is no spark on my 1987 ford bronco 2 There is power to the coil but still no spark.We have changed three coils and still no spark.We do not believe that the coil is the problem are there any o...
1987 Ford Bronco II
-
Maintenance & Repair
when i drive for a while my check engine light comes on and i dont know why any one else have this prob and what does it mean. every thing is running very good nothing is wrong it just comes on after...
1989 Ford Bronco II
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.