06 Dodge Durango
In my 06 Dodge Durango I change the spark plugs
an the cylinder but it keeps telling me cylinder 2
misfire any suggestions and thank you
Asked by Sandyk4452 Jul 07, 2019 at 03:55 AM about the 2006 Dodge Durango SLT 4WD
Question type: Maintenance & Repair
In my 06 Dodge Durango I change the spark plugs
an the cylinder but it keeps telling me cylinder 2
misfire any suggestions and thank you
I would replace the coil on that cylinder next. You can try swapping coils from one cylinder to another and see if the code indicates another cylinder, then you know for sure. If you still have a cylinder #2 misfire, I would suspect the fuel injector or a valve issue.
In my 06 Dodge Durango I change the spark plugs an the cylinder but it keeps telling me cylinder 2 misfire any suggestions and thank you
2006 Dodge Durango SLT 4WD
-
Maintenance & Repair
My parents dodge durango will not start. It ran before we changed the cam and crank sensors. They coded on the obd2 saying they were bad so we changed them, now when we try to start it it just won...
2006 Dodge Durango SXT 4WD
-
Maintenance & Repair
What other engines will fit into the 2005 dodge durango to where all wires and everything fit exactly and won't reallyrics have to change transmission
2005 Dodge Durango
-
Maintenance & Repair
I have 2003 dodge Durango it got Brooke in to and took the ignition out it started once for 2 secs and now nocrank nostart
2003 Dodge Durango SLT 4WD
-
Maintenance & Repair
I have a 99 Dodge Durango one day I got in it and it wouldn't start so someone changed the fuel pump my crankshaft sensor and I just got my throttle shift sensor change the car still doing the sa...
1999 Dodge Durango SLT 4WD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.