2010 Jeep Liberty 4x4 issues
I have a 2010 Jeep Liberty and it shifted into 4wd
all by itself while I was driving down the road. The
following lights are on: esc off, 4wd, 4 low, and serv
4wd. These have come on before and nothing
happened. There are no error codes to Id the
Were you able to fix, I just had same thing happen tonight.
Finally took to shop, and they’ve had it for almost 2 weeks. Apparently Chrysler did a number with the type of wire they used. There is also a switch that operates the 4x4 that was bad, but still looking
So I was able to clear my dash, all I did was put in neutral with jeep running and move selector to 4 low up to 4 auto and up to 2wd,I was just trying to see if I could hear transfer case actuator motor was working but if I put into 4 low, escoff, flashing 4 low and transmission maintenance lights all come back on. From what I was reading could be speed sensor behind front driver tire, fdcm, transfer case actuator motor and some people said shifter sensor switch under center console on top of transmission. Let me know if this works for you.