2008 G. Caravan Code C2200 (another one)
Asked by Jose L. Nov 27, 2018 at 02:34 PM about the 2008 Dodge Grand Caravan SXT FWD
Question type: Maintenance & Repair
2008 G. Caravan. Brake warning lights on. Code C2200 with ABS reader
and reset. Lights come on at around 12 mph. Changed Front wheel hubs
about 2 months ago w/ new speed sensors. today I changed speed sensors
again and check Omh and voltage from ABS module plus condition of the
hubs, they seem to be good, clear codes with ABS code reader
I keep getting C2200 at 12 mph. going crazy now. Are there similar sensors
in the back? I haven't found access to a better computer like the Snapon
Solus which will help a lot.
Thank guys.
7 Answers
I just wanted to add, I'm in the central Florida area. Just in case, somebody has any additional ideas on how to diagnose or help in this same area. Thanks again.
Graph all 4 wave forms on the solus at the same time to see which one looks different or not complete.
I haven't found access to a solus, And the auto shops around here don't offer diagnosis with it. Would love to buy one, but out of my budget, which is set by my Wife Commission of Finance Affairs.
If you work on your own vehicle, an Autel DS808 or the 708 is very affordable. 708 is discontinued as you might get an even better deal on one. Many small shops have these.
Do an abs break bleed . you need a bit directional scan tool. It solved my issue same code same symptoms.
This is what solved the problem for me. Change the Moog front hubs I had previously installed and got Mopar hubs. Reset what I could with ABS non bidirectional reader and leaving the battery negative disconnected. After driving, the abs kept lighting. Since the code was for the abs pump, I did a couple of hard stops on sand and it got better. Reset codes and more hard stops. The problem completely disappeared even months after. Hope this is helpful.
