I just changed the clutch, pressure plate, pilot bearing and throw out bearing on my 2008 Ford Mustang V6. I put everything back together and notice the clutch pedal was on the floor. Whats wrong here

I just changed the clutch, pressure plate, pilot bearing and throw out bearing on my 2008 Ford Mustang V6. I put everything back together and notice the clutch pedal was on the floor. Whats wrong here 6 Answers

Why can I not switch gears when the car is on? I already replaced the clutch, FW, TOB and pressure plate, yet to no avail. 2 Answers

I replace the the clutch, Trow out bearing, pilot, fly wheel and pressure plate. Nothing changed...

I changed the time change on my mustang 20 Answers

I changed the time change on my mustang and it's still making the same noise in the middle of the engine

I have a1995 ford mustang GT 5.0. recently I was reving my engine, and just shortly after my car started bucking and hesitating. Almost dieing at a complete stop. If the stop was long enogh it would stop. I have changed the EGR valve, the IAC valve and the fuel regulator. Also I have replaced all of the hoses that go to the upper intake and the upper intake gasket. I just cleaned the MAF sensor with MAF sensor spray cleaner and now the the check enging light is on and it hesitates when I drive. but the rpms are steady as to where before they were all over the band. any Ideas 4 Answers

I have a1995 ford mustang GT 5.0. recently I was reving my engine, and just shortly after my car started bucking and hesitating. Almost dieing at a complete stop. If the stop was long enogh it would...

my 2002 ford convertible mustang is having issues ithought it was the battery i changed battery and it will only run for a few minutes and shut off 2 Answers

about 1 month prior i had factory radio taken out and a cd kenwood cd player put in about 3 weeks ago it was really hot outside and it seemed to be running hot i had drips of fluid falling on my fee...