High Beams work only but low beams do not , both are out at the same time, why??

Asked by kdt1056 Feb 26, 2014 at 08:41 PM about the 1994 Saturn S-Series 2 Dr SC1 Coupe

Question type: Maintenance & Repair

At night when I put on my low beams they are out but when I go to high beams they are the only ones that work why? is there a fuse for the low beams or do both low beams bulbs need to be replaced??

2 Answers

102,615

Try replacing your bulbs. Probably the low beam has burned out. Some cars have a high beam relay and a low beam relay. Not sure if the Saturn has both. It could be a low beam relay if your car comes so equipped. Replace the relay first, if no dice, do the bulbs. If still nothing, your switch is bad.

1 people found this helpful.
80

Everybody who reads this post; save yourself lots of time and frustration looking for the problem and tearing your car apart, and just cut off the cable ends of your aged cars battery cables and replace them with a fresh terminal end. Clean your battery terminals well, with a battery terminal cleaner/brush (any automotive parts store usually has this close to the terminals you'll be buying to repair the ends of your corroded battery cables) This connection is a critical electrical passageway for current-flow to and from your battery, to the different electrical circuits in your car that depend on this connection or current passageway being 100% healthy Think of it as the electrical starting point**. And when its corroded, under the nice looking rubber encapsulated head where you can't see it hidden like cancer, at the end of the battery cable, things go wrong with the electrical circuits, often in a major way, as-well as in minor ways (different devices in your car don't operate correctly), your lights dim up and down or flicker, weird things happen when you step on the brake, unexplainably, headlights suddenly won't operate and all kinds of other weird electrical phenomena occur!. So, do yourself a "BIG" favor and start by doing this repair up front if you own a car with these kind of cables and save yourself countless hours tearing your car apart and chasing your tail , looking for the problems. Take it from a guy who spent over seven years dealing with corrosion on electrical/Avionics gear aboard Naval aircraft everyday and has seen the same problem on many, many cars in his life! May you have good fortune after replacing the corroded cable ends!

8 people found this helpful.

Your Answer:

CarGurus Experts

  • #1
    Alex Nazarian
    Reputation
    2,640
  • #2
    Paul Martin
    Reputation
    1,930
  • #3
    helpmeplease
    Reputation
    1,450
View All

Find great deals from top-rated dealers

Search

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.