P0700 is a generic Transmission code. P1603 is an O2 code on Bank 2, the one after the catalytic convertor, P0887 is a transmission control module fault reading a high voltage. Have her take it into the garage so the correct repair can be done. P0700 and P0887 are probably related to one issue. The O2 might be a sensor, but it could be something else, like a vacuum leak.
We took it to the mechanic and he said to replace the TTS
My moms 07 Chrysler pt cruiser detected these codes when we scanned it and dont know what they mean 1603,700, and 887
2007 Chrysler PT Cruiser Convertible FWD
-
Maintenance & Repair
P0882 says Open or short circuit condition, failed TCM relay, failed Transmission solenoid/pressure switch. P0700 says shorted or open circuit within transaxle, failure of transaxle control module. P1...
2006 Chrysler PT Cruiser GT Convertible FWD
-
Maintenance & Repair
my engin light came on what do I do
2005 Chrysler PT Cruiser Wagon FWD
-
Maintenance & Repair
My car was running hot ,I had a new radiator and radiator fan installed... still ran hot so took it to someone else and was told I may have a cracked or blown head gasket but no one will touch it! ...
2002 Chrysler PT Cruiser Limited Wagon FWD
-
Maintenance & Repair
Can anyone help with the folliwng codes 0500 1130 0070 0100 1652
2003 Chrysler PT Cruiser Limited Wagon FWD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.