if its a manual shifter linkage then you can just unscrew it, thats how my 96 was
I think there should be a little disk in the top of the knob that has the shift pattern on it, if so pop it out with a screw driver and the nut will be under there. Thats if it's like my 2001. It should be
^^^^ This should be how it comes off
can the shifter knob be removed and if so is there a secret to removing the knob
2004 Dodge RAM 2500 ST Quad Cab RWD
-
Maintenance & Repair
The shifter was hard to put into gear and it finally broke.so I just want to put it into drive so I can drive to shop?
2005 Dodge RAM 2500 Laramie LB 4WD
-
Maintenance & Repair
my truck wont come out of park. No tranny problems before last weekend. Changed the cable from the shifter to the tranny cause I broke it and still truck can't change gears. Please help
2006 Dodge RAM 2500 SLT Quad Cab RWD
-
Maintenance & Repair
Thought coolant might have been left low after both side intake gasket repair. So added the 3/4 gal. All was good for about a week. Even sat at idol yesterday for 30 minutes and held at 200. On a ...
2010 Dodge RAM 2500 Laramie Crew Cab 4WD
-
Maintenance & Repair
I have a dodge ram 2500 4x4 5.7 ltr that is frying PCM. On #4 PCM now. Has fried #3 coil two of the times. The last PCM lasted ONE DAY
2004 Dodge RAM 2500
-
Maintenance & Repair
CarGurus has 31 nationwide RAM 2500 listings starting at $7,900.
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.